» Support » Downloads » Hardware Support
MicroPulse Hardware Utilities
Manuals and hardware configuration tools.
Note:

    The following utilities are provided as a courtesy to UTEX Scientific Instruments customers, and are therefore offered on an "as is" basis. UTEX does not maintain or support these programs. If you are unsure of whether and how to use these tools, please consult the hardware manufacturer directly, or contact UTEX for further guidance.

Supported Instruments:

    MicroPulse LT, LT2 and MP5 instruments

System Requirements:
    • Windows XP or later.
    • MicroPulse instrument must be connected on the same network as the host PC. A direct connection is preferred for most instrument firmware maintenance operations.
Download Instructions:
    1. Please see the "Related Files" section below
    2. Right-click on the file name and choose "Save Target as" or "Save..." to download the file to your computer.
    3. Right-click on the downloaded *.ZIP file, and select Extract All to unpack the utility programs and help documents.
    4. Run the utility program that you need.
Notes and Cautions:

    Do not run the PeakFlashUpdate utility without explicit instructions form either Peak NDT or UTEX. Doing so improperly will damage your instrument, requiring it to be returned to Peak NDT for a non-warranty repair.

    The MicroPulse LT user guide contains instructions for assigning a new IP address to the instrument using the PeakIPAssign program.

    Access to downloads on this page is restricted.
    Please provide the following:
    ( Required field)
    E-mail:
    Download Password:
    The following file links will become active once the required information is submitted:
    Related Files
    MicroPulse Utility Package.zip (3.7 MB)
     
Document Reference
Categories
Instruments
Micropulse Devices 
Product Version/Model
LT, LT2, MP5 
Document Number
DSEO-B89N971529
Published
2019/01/09 Rev: 1.0
  Print Email page Share